Optidrive P2
Product Knowledgebase Index
We provide in-house technical support for the complete range of products we sell.
We have a team of Technical Support Engineers on hand to answer technical questions and offer advice on application problems.
Please see below an index of our comprehensive knowledgebase.
| Doc Number | Title (Click link to access) | Summary |
|---|---|---|
| MCW-P2-001 | P2 Parameter P1-13 = 1, Set-up Guide | P2 Set-up guide with P1-13 = 1 - Default terminal configuration |
| MCW-P2-002 | P2 Motorised Potentiometer Set-up Guide | 3 different set-ups for motorised pot function on Optidrive P2 |
| MCW-P2-003 | P2 Displaying RPM on the drives display | How to show RPM on the drives display |
| MCW-P2-004 | P2 Control Mode – Parameter P4-01 | Information on P2 Parameter P4-01 - Control Mode |
| MCW-P2-005 | P2 Autotune – Parameter P4-02 | Information on P2 Parameter P4-02 - Autotune |
| MCW-P2-006 | P2 Closed loop control with incremental encoder | Setting P2 in closed loop control with AC motor and encoder |
| MCW-P2-007 | P2 Saving a User Parameter Set | Information on P2 saving a User Parameter set |
| MCW-P2-008 | P2 Keypad Control Setup Information | P2 Keypad Control Setup Information |
| MCW-P2-009 | P2 Displaying motor current on the drives display | How to show motor current on the drives display |
| MCW-P2-010 | P2 PID Control | Basic set up of the Optidrive P2 PID loop |
| MCW-P2-011 | P2 min & recommended brake resistor values | Optidrive P2 minimum and recommended braking resistor values |
| MCW-P2-012 | Optidrive P2 current limits and overload | Information on the Optidrive P2 current limits and overload |
| MCW-P2-013 | Optidrive P2 Read Only Status Parameters | Information on the Optidrive P2 read only status parameters |
| MCW-P2-014 | Using Optidrive P2 with ACPM and BLDC motors in open loop | Information on setting up Optidrive P2 for use with an AC Permanent Magnet (ACPM) servo motors and Brushless DC (BLDC) motors in open loop control |
| MCW-P2-015 | Optidrive P2 Simple Motor Brake Control | Information on setting up the P2 to control a simple motor brake |
| MCW-P2-016 | Optidrive P2 Hoist Mode Control | Information on setting up the Optidrive P2 for Hoist mode control for crane type applications |
| MCW-P2-017 | Optidrive P2 Dynamic braking | Information on setting up the Optidrive P2 for dynamic braking |
| MCW-P2-018 | Optidrive P2 3 preset speeds from 3 or 4 separate terminals | Information on setting up the Optidrive P2 for 3 preset speeds from 3 or 4 seperate terminals (3 set up examples in this document) |
| MCW-P2-019 | Optidrive P2 motor thermistor set-up | Information on how to set up a motor thermistor with P2 |
| MCW-P2-020 | Optidrive P2 Set up for controlling motor torque | Information on how to set up the Optidrive P2 to control motor torque |
| MCW-P2-021 | Optidrive P2 Bi-polar speed reference set-up | Information on how to set up the Optidrive P2 for achieving an analogue bi-polar speed reference |
| MCW-P2-022 | Using an A and B output encoder with Optidrive P2 | Information on the connections required when using an A and B output encoder with Optidrive P2 |
| MCW-P2-023 | Optidrive P2 Limit switch set up | Information on how to set up the Optidrive P2 for limit switch operation |
| MCW-P2-024 | Optidrive P2 Variable Speed Select Function | Information on how to set up the Optidrive P2 for a variable speed select function |
| MCW-P2-025 | Optidrive P2 on Generator Supplies | Information and considerations for using Optidrive P2 on a generator supply |
| MCW-P2-026 | Optidrive P2 P1-13 = 21 Set-up Guide | Information on Optidrive P2 P1-13 = 21 Set-up Guide - Momentary push button Start / Stop control |
| MCW-P2-027 | Powering up the P2 Control from 24VDC | Information on Powering up the P2 Control from 24VDC |
| MCW-P2-028 | P2 Parameter P1-13 = 21 Set-up Guide – Momentary Control | Information on P2 Parameter P1-13 = 21 Set-up Guide - Momentary Control |
| MCW-P2-029 | Optidrive P2 STO (Safe Torque Off) Circuit Connections | Information on Optidrive P2 STO (Safe Torque Off) Circuit Connections |
| MCW-P2-030 | Optidrive P2 with Slip Ring Motors | Information on using Optidrive P2 with Slip Ring motors |
| MCW-P2-031 | Optidrive P2 Overspeed Protection | Information on using Optidrive P2 overspeed protection |
| MCW-P2-032 | Optidrive P2 Fault Finding Guide | Information on fault finding on Optidrive P2 |
| MCW-P2-033 | Optidrive P2 Push Button Start/Stop Control with Stay-Put Forward/Reverse Input | Information on how to set Optidrive P2 up for push button start/stop control but with a stay-put forward/reverse input |
| MCW-P2-034 | Setting up Optidrive P2 for use with Synchronous Reluctance motors | Information on setting up Optidrive P2 for use with Synchronous Reluctance motors |
| MCW-P2-035 | P2 – Reducing Induction Motor Audible Noise In Inverter Drive Applications | Information on Optidrive P2 - Reducing Induction Motor Audible Noise In Inverter Drive Applications |
| MCW-P2-036 | Optidrive P2 Auto-Start and Auto-Reset Functions | Information Optidrive P2 Auto-Start and Auto-Reset Functions |
| MCW-P2-037 | Optidrive P2 Modbus RTU Control & Register Mapping | Optidrive P2 Modbus RTU Control & Register Mapping |
| MCW-P2-038 | Optidrive P2 Master – Slave Network Set-up | Information On Setting Up P2 For A Master - Slave Network |
| MCW-P2-039 | Optidrive P2 PID Control – How it works | Gives information on how the Optidrive P2 PID control works. Set up examples can be found in MCW-P2-010 |
| MCW-P2-040 | Using RCD’s with Invertek P2 Variable Frequency Drives | Gives information on using RCD's with Invertek P2 Variable Frequency Drives |
| MCW-P2-041 | Using Optidrive P2 on high speed motors | Gives information on using Optidrive P2 on high speed motors |
| MCW-P2-042 | Using 3-Phase P2’s from Single Phase Power Supplies | Gives information on using 3-phase P2's from single phase power supplies |
| MCW-P2-043 | P2 Inverter drives supplied from a busbar and brushgear system | Gives information on P2 inverter drives supplied from a busbar and brushgear system |
| MCW-P2-044 | Configuring 2 x P2 drives as a master & following with 2 motors with the motor shafts rigidly coupled together | Gives information on configuring 2 x P2 drives as a master & following with 2 motors with the motor shafts rigidly coupled together |
| MCW-P2-045 | Optidrive P2 Addition Acceleration & Deceleration Ramps | Gives information on setting up additional acceleration and deceleration ramps for Optidrive P2 |